NAVIGATION : INDEX DU FORUM / ACCUEIL DE P2PFR / WIKI

Merci de faire une recherche avant de poster :)

Nous sommes actuellement le 28 Mars 2024 20:42

Heures au format UTC + 1 heure [ Heure d’été ]




Publier un nouveau sujet Répondre au sujet  [ 16 messages ]  Aller à la page 1, 2  Suivant
Auteur Message
 Sujet du message: Nicotine ne repond plus : ValueError
MessagePublié: 31 Jan 2009 19:11 
Hors-ligne
Mangouste Du Désert

Inscrit le: 31 Jan 2009 19:04
Messages: 6
Salut,

J'aimerais vous toucher 2 mots d'une erreur que j'ai depuis hier avec Nicotine. maintenant au démarrage, Nicotine bloque. En lançant dans un terminal, j'obtiens les messages suivants, mais cela ne m'avance pas à grand chose :
Code:
...
   if self.np.config.needConfig():
  File "/usr/lib/python2.5/site-packages/pynicotine/config.py", line 83, in needConfig
    if self.sections[i][j] is None or self.sections[i][j] == '' and i not in ("userinfo", "ui", "ticker") and j not in ("incompletedir", "autoreply", 'afterfinish','afterfolder', 'geoblockcc'):
  File "/usr/lib/python2.5/UserDict.py", line 173, in __cmp__
    return cmp(dict(self.iteritems()), other)
  File "/usr/lib/python2.5/UserDict.py", line 106, in iteritems
    yield (k, self[k])
  File "/usr/lib/python2.5/shelve.py", line 113, in __getitem__
    value = Unpickler(f).load()
ValueError: could not convert string to int

et là j'ai la fenêtre toute blanche et plus rien ne se passe, Nicotine ne réponds pas. C'est vraiment étonnant !

Savez-vous ce que cela veut dire ?

J'utilise FC8 et je ne sais plus quelle version de Nicotine (mais pas la dernière, une de 2 ans environ, mais qui a toujours marché). Pas fait de manip' particulère sur mon pc ces derniers temps ... (je n'ai plus que 100 Mo de place sur mon home et dernièrement quand je lance Azureus, il y a mount.ntfs-3g qui se lance et prends 90% de la mémoire du processeur. Est-ce lié ?)

merci bien !

Vincent


Rapporter ce message
Haut
 Profil  
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 01 Fév 2009 14:39 
Hors-ligne
0 ou 1 je me tâte
Avatar de l’utilisateur

Inscrit le: 07 Déc 2001 02:00
Messages: 10996
Localisation: Lille et ailleurs
Salut,

Ca pourrait venir de python, de nicotine, ou bien d'une erreur dans tes paramètres utilisateur de nicotine, par exemple un nom de fichier dont l'encodage est bizarre à télécharger...

Tente voir de relancer nicotine en ayant déplacé ton ~/.nicotine (vers .nicotine-bak par expl).

Sinon, je déconseille d'écrire directement sur de l'NTFS, surtout avec des applications un peu violentes (multiples écritures successives) comme les P2P. Enfin, NTFS 3G doit être relativement fiable, mais ce serait mieux que tu télécharges sur une partition ext2 ext3, puis que tu déplaces le fichier vers ta partition de stockage ensuite.

Ca n'est pas bon non plus d'avoir peu de place dans son /home, les fichiers ont davantage tendance à se fragmenter et si ça arrive à 0 t'auras des problèmes chelous d'utilisation (mais rien de grave).

Je connais pas bien Fedora, mais si tu peux, metts à jour tes paquets (de nicotine en particulier), ou éventuellement utiliser un autre client soulseek pour Linux (j'ai entendu parler de Museeq, pas éssayé, je ne sais plus s'il y en a d'autres, je sais que l'un d'eux est un "daemon" sur lequel on peut connecter ou non une interface graphique, mais je ne sais plus si c'est museeq ou un autre)

:coucou:


Rapporter ce message
Haut
 Profil Site Internet 
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 05 Fév 2009 22:50 
Hors-ligne
Mangouste Du Désert

Inscrit le: 31 Jan 2009 19:04
Messages: 6
Hey salut merci beaucoup, j'ai de nouveau Nicotine !

Tu m'as dit, c'est peut être à cause d'un nom de fichier à télécharger dont le nom n'est pas correct (mmmh ... c'est vraiment possible ?) Dans ce cas vu que nicotine a planté, comment réparer ? Peut être en allant dans le fichier ~/nicotine/config, mais va trouver le fichier.
Ce qui a marché a été de remplacer le dossier ~/.nicotine en .nicotine-bak. J'ai relancé le logiciel, et là c'était comme si je l'utilisais pour la première fois, j'ai du rerentrer mes petits paramètres d'utilisation, et ensuite c'était tout bon. J'ai téléchargé mon premier fichier, ça a été Kyuss "mondo generator" :)
En fait un nouveau dossier .nicotine a été créé.

Merci pour tes autres indications, tu as raison il faut que j'agrandisse ma partition, mais bon je ne sais pas quels outils existent, alors cela va prendre un peu de temps.
Quant aux auters logs genre de daemon, j'aimerais bien savoir utiliser, mais je pb, classique, est le manque de documentation ... je kifferais bien un logiciel en ligne de commande !!

merci !

Vincezd


Rapporter ce message
Haut
 Profil  
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 06 Fév 2009 13:52 
Hors-ligne
0 ou 1 je me tâte
Avatar de l’utilisateur

Inscrit le: 07 Déc 2001 02:00
Messages: 10996
Localisation: Lille et ailleurs
Resalut ;)

Si besoin, tu pourrais éventuellement rappatrier petit à petit tes anciens paramètres de ton fichier config (ou de ta liste de fichiers en cours de téléchargement), jusqu'a trouver le fautif (copier l'intégrité du truc, et voir si le problème se reproduit par expl).

Pour aggrandir la partition, y'a le logiciel gparted (gnome) ou qtparted (KDE), mais faut être prudent, et songer sérieusement à sauvegarder les données avant l'opération.

Pour le daemon et ses clients, un "man nom_du_truc" ou le site officiel devraient contenir la doc suffisante, je pense pas que ce soit trop galère en place ; mais si ton nicotine marche y'a sans doute pas de raison de changer ...


Rapporter ce message
Haut
 Profil Site Internet 
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 06 Fév 2009 17:40 
Hors-ligne
Abbé S.D.
Avatar de l’utilisateur

Inscrit le: 03 Juin 2005 11:45
Messages: 3440
Localisation: Darlington County
Et pour info, c'est bien museekd, le daemon pour *nix. Je l'ai jamais essayé et à en croire le site, le développement s'est un peu arrêté en 2004, et le fork, Museek+, en 2007...

http://museek.thegraveyard.org/
http://museek-plus.sourceforge.net/


Rapporter ce message
Haut
 Profil Site Internet 
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 25 Juin 2009 23:27 
Bonjour,

Je suis nouvel utilisateur de Fedora 11. Quelqu'un saurait me dire pourquoi le système n'arrive pas à créer de paquet Nicotine+ ? Voici la situation:
- les fichiers sources de l'archive nicotine+-1.2.12.tar.bz2 ont été placés dans /opt/nicotine+-1.2.12.
- dans ce répertoire, je lance la commande: su -c "python setup.py bdist_rpm" qui fonctionne jusqu'à l'apparition des erreurs suivantes (3 dernières lignes):
Code:
hard linking trayicon/trayiconmodule.c -> nicotine-1.2.12/trayicon
tar -cf dist/nicotine-1.2.12.tar nicotine-1.2.12
gzip -f9 dist/nicotine-1.2.12.tar
removing 'nicotine-1.2.12' (and everything under it)
copying dist/nicotine-1.2.12.tar.gz -> build/bdist.linux-x86_64/rpm/SOURCES
building RPMs
erreur: Impossible d'ouvrir l'icône /root/rpmbuild/SOURCES/nicotine.png: Aucun fichier ou dossier de ce type
erreur: échec de la requête sur le fichier spec build/bdist.linux-x86_64/rpm/SPECS/nicotine.spec, impossible de faire l'analyser syntaxique
error: Failed to execute: "rpm -q --qf '%{name}-%{version}-%{release}.src.rpm %{arch}/%{name}-%{version}-%{release}.%{arch}.rpm\\n' --specfile 'build/bdist.linux-x86_64/rpm/SPECS/nicotine.spec'"

Je ne sais pas comment résoudre ce problème.
Vincezd ?


Rapporter ce message
Haut
  
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 26 Juin 2009 18:34 
Hors-ligne
Mangouste Du Désert

Inscrit le: 31 Jan 2009 19:04
Messages: 6
Mauvaise pioche ! Je ne connais pas ton pb, je n'ai jamais utilisé la commande avec laquelle tu veux installer Nicotine+. Moi j'avais trouvé un rpm pour F8. Ce doit bien être trouvable pour ta F11, non ? Cherche bien, et commence par la documentation fedora plutôt que par google ... c ce dont j'ai retenu de mes derniers essais :p
Navré, et bonne chance !


Rapporter ce message
Haut
 Profil  
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 27 Juin 2009 10:14 
Merci pour ta réponse. J'ai bien regardé et il y a bien un paquet pour Fedora 11, mais en architecture processeur 32 bits me semble-t-il (voir ici https://fedoraproject.org/wiki/Packagin ... y_May_2009 et une discussion in English sur le forum What software is missing ?). Donc ce paquet devrait fonctionner avec mon processeur 64 bits, cependant J'aurais aimé que ce soit optimisé pour ma configuration.


Rapporter ce message
Haut
  
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 27 Juin 2009 13:19 
Hors-ligne
0 ou 1 je me tâte
Avatar de l’utilisateur

Inscrit le: 07 Déc 2001 02:00
Messages: 10996
Localisation: Lille et ailleurs
Au pire c'est pas trop grave, les histoires de 32 ou 64 bits j'ai l'impression que les performances sont variables et qu'on ne gagne pas forcément (voir l'inverse) à utiliser du 64 bits. Puis, le temps que tu perds à chercher la version 64 bits dépasse largement les quelques lenteurs éventuelles que tu aurais pu avoir en utilisant Nicotine 32 bits ;)


Rapporter ce message
Haut
 Profil Site Internet 
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 11 Juil 2009 11:58 
Ok; j'ai donc procédé comme ceci, d'après le fichier INSTALL :
dans le répertoire source, je tape pour installer nicotine+ 1.2.12 dans /opt/nicotine+/:
python setup.py install --prefix=/opt/nicotine+/

Ca marche à peu près et il s'affiche dans la console:

Code:
/usr/lib64/python2.6/distutils/dist.py:266: UserWarning: Unknown distribution option: 'windows'
  warnings.warn(msg)
running install
running build
running build_py
creating build
creating build/lib
creating build/lib/pynicotine
copying pynicotine/multiselect.py -> build/lib/pynicotine
copying pynicotine/utils.py -> build/lib/pynicotine
copying pynicotine/transfers.py -> build/lib/pynicotine
copying pynicotine/pluginsystem.py -> build/lib/pynicotine
copying pynicotine/ConfigParser.py -> build/lib/pynicotine
copying pynicotine/slskproto.py -> build/lib/pynicotine
copying pynicotine/libi18n.py -> build/lib/pynicotine
copying pynicotine/_testmp3.py -> build/lib/pynicotine
copying pynicotine/__init__.py -> build/lib/pynicotine
copying pynicotine/slskmessages.py -> build/lib/pynicotine
copying pynicotine/metadata_mutagen.py -> build/lib/pynicotine
copying pynicotine/mp3.py -> build/lib/pynicotine
copying pynicotine/logfacility.py -> build/lib/pynicotine
copying pynicotine/config.py -> build/lib/pynicotine
copying pynicotine/pynicotine.py -> build/lib/pynicotine
creating build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/userlist.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/about.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/utils.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/search.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/translux.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/uploads.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/nowplaying.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/downloads.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/mozembed.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/checklatest.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/frame.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/imagedata.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/__init__.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/userinfo.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/dirchooser.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/glade2py.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/entrydialog.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/settingswindow.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/privatechat.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/ticker.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/userbrowse.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/transferlist.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/chatrooms.py -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/mainwindow.glade -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/privatechat.glade -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/search.glade -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/userinfo.glade -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/chatrooms.glade -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/nicotine-settings.glade -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/roomlist.glade -> build/lib/pynicotine/gtkgui
copying pynicotine/gtkgui/userbrowse.glade -> build/lib/pynicotine/gtkgui
running build_scripts
creating build/scripts-2.6
copying and adjusting nicotine.py -> build/scripts-2.6
copying and adjusting nicotine-import-winconfig -> build/scripts-2.6
changing mode of build/scripts-2.6/nicotine.py from 664 to 775
changing mode of build/scripts-2.6/nicotine-import-winconfig from 664 to 775
running install_lib
creating /opt/nicotine+/lib
creating /opt/nicotine+/lib/python2.6
creating /opt/nicotine+/lib/python2.6/site-packages
creating /opt/nicotine+/lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/multiselect.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
creating /opt/nicotine+/lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/userlist.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/about.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/mainwindow.glade -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/utils.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/search.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/privatechat.glade -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/translux.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/uploads.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/nowplaying.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/downloads.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/mozembed.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/checklatest.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/search.glade -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/frame.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/imagedata.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/userinfo.glade -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/__init__.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/userinfo.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/dirchooser.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/chatrooms.glade -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/glade2py.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/nicotine-settings.glade -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/entrydialog.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/settingswindow.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/privatechat.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/roomlist.glade -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/ticker.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/userbrowse.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/userbrowse.glade -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/transferlist.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/gtkgui/chatrooms.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui
copying build/lib/pynicotine/utils.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/transfers.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/pluginsystem.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/ConfigParser.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/slskproto.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/libi18n.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/_testmp3.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/__init__.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/slskmessages.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/metadata_mutagen.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/mp3.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/logfacility.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/config.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
copying build/lib/pynicotine/pynicotine.py -> /opt/nicotine+//lib/python2.6/site-packages/pynicotine
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/multiselect.py to multiselect.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/userlist.py to userlist.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/about.py to about.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/utils.py to utils.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/search.py to search.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/translux.py to translux.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/uploads.py to uploads.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/nowplaying.py to nowplaying.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/downloads.py to downloads.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/mozembed.py to mozembed.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/checklatest.py to checklatest.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/frame.py to frame.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/imagedata.py to imagedata.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/__init__.py to __init__.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/userinfo.py to userinfo.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/dirchooser.py to dirchooser.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/glade2py.py to glade2py.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/entrydialog.py to entrydialog.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/settingswindow.py to settingswindow.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/privatechat.py to privatechat.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/ticker.py to ticker.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/userbrowse.py to userbrowse.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/transferlist.py to transferlist.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/gtkgui/chatrooms.py to chatrooms.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/utils.py to utils.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/transfers.py to transfers.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/pluginsystem.py to pluginsystem.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/ConfigParser.py to ConfigParser.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/slskproto.py to slskproto.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/libi18n.py to libi18n.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/_testmp3.py to _testmp3.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/__init__.py to __init__.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/slskmessages.py to slskmessages.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/metadata_mutagen.py to metadata_mutagen.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/mp3.py to mp3.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/logfacility.py to logfacility.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/config.py to config.pyc
byte-compiling /opt/nicotine+//lib/python2.6/site-packages/pynicotine/pynicotine.py to pynicotine.pyc
running install_scripts
creating /opt/nicotine+/bin
copying build/scripts-2.6/nicotine-import-winconfig -> /opt/nicotine+//bin
copying build/scripts-2.6/nicotine.py -> /opt/nicotine+//bin
changing mode of /opt/nicotine+//bin/nicotine-import-winconfig to 775
changing mode of /opt/nicotine+//bin/nicotine.py to 775
running install_data
copying manpages/nicotine.1 -> /usr/share/man/man1
copying manpages/nicotine-import-winconfig.1 -> /usr/share/man/man1
copying files/nicotine-plus-32px.png -> /usr/share/pixmaps
copying files/nicotine.desktop -> /usr/share/applications
copying languages/pl/nicotine.mo -> /usr/share/locale/pl/LC_MESSAGES
copying languages/hu/nicotine.mo -> /usr/share/locale/hu/LC_MESSAGES
copying languages/nl/nicotine.mo -> /usr/share/locale/nl/LC_MESSAGES
copying languages/es/nicotine.mo -> /usr/share/locale/es/LC_MESSAGES
copying languages/it/nicotine.mo -> /usr/share/locale/it/LC_MESSAGES
copying languages/fr/nicotine.mo -> /usr/share/locale/fr/LC_MESSAGES
copying languages/de/nicotine.mo -> /usr/share/locale/de/LC_MESSAGES
copying languages/sk/nicotine.mo -> /usr/share/locale/sk/LC_MESSAGES
copying languages/fi/nicotine.mo -> /usr/share/locale/fi/LC_MESSAGES
copying languages/sv/nicotine.mo -> /usr/share/locale/sv/LC_MESSAGES
copying languages/da/nicotine.mo -> /usr/share/locale/da/LC_MESSAGES
copying languages/pt_BR/nicotine.mo -> /usr/share/locale/pt_BR/LC_MESSAGES
copying languages/eu/nicotine.mo -> /usr/share/locale/eu/LC_MESSAGES
copying languages/lt/nicotine.mo -> /usr/share/locale/lt/LC_MESSAGES
creating /usr/share/nicotine
creating /usr/share/nicotine/sounds
creating /usr/share/nicotine/sounds/default
copying sounds/default/private.ogg -> /usr/share/nicotine/sounds/default
copying sounds/default/room_nick.ogg -> /usr/share/nicotine/sounds/default
copying sounds/default/details.txt -> /usr/share/nicotine/sounds/default
copying sounds/default/license.txt -> /usr/share/nicotine/sounds/default
creating /usr/share/nicotine/sounds/cough
copying sounds/cough/private.ogg -> /usr/share/nicotine/sounds/cough
copying sounds/cough/room_nick.ogg -> /usr/share/nicotine/sounds/cough
copying sounds/cough/details.txt -> /usr/share/nicotine/sounds/cough
copying sounds/cough/license.txt -> /usr/share/nicotine/sounds/cough
creating /usr/share/nicotine/documentation
copying doc/BUILD_win32.txt -> /usr/share/nicotine/documentation
copying doc/KNOWN_BUGS -> /usr/share/nicotine/documentation
copying doc/README.trayicon -> /usr/share/nicotine/documentation
copying doc/NicotinePlusGuide.html -> /usr/share/nicotine/documentation
copying doc/py2app -> /usr/share/nicotine/documentation
copying doc/TRANSLATIONS -> /usr/share/nicotine/documentation
copying doc/TRANSLATORS -> /usr/share/nicotine/documentation
copying doc/CHANGELOG -> /usr/share/nicotine/documentation
copying doc/README.import-winconfig -> /usr/share/nicotine/documentation
copying doc/TODO -> /usr/share/nicotine/documentation
copying doc/MAINTAINERS -> /usr/share/nicotine/documentation
copying doc/CHANGELOG_DOCS -> /usr/share/nicotine/documentation
copying doc/INSTALL -> /usr/share/nicotine/documentation
copying doc/README -> /usr/share/nicotine/documentation
running install_egg_info
Writing /opt/nicotine+//lib/python2.6/site-packages/nicotine-1.2.12-py2.6.egg-info


Ensuite, en suivant toujours les instructions de INSTALL, je tape:
python ./nicotine
Que ce soit dans le répertoire source ou dans /opt/nicotine+/, le fichier n'existe pas:
Code:
python: can't open file './nicotine': [Errno 2] No such file or directory
.

J'ai essayé dans /opt/nicotine+: python ./bin/nicotine.py ou bien ./bin/nicotine.py
et j'obtiens le message d'erreur suivant:
Code:
Traceback (most recent call last):
  File "./bin/nicotine.py", line 26, in <module>
    from pynicotine.logfacility import log
ImportError: No module named pynicotine.logfacility


Ma question est donc: comment installer et lancer nicotine+ 1.2.12 sous Fedora11 ?


Rapporter ce message
Haut
  
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 11 Juil 2009 19:35 
Hors-ligne
0 ou 1 je me tâte
Avatar de l’utilisateur

Inscrit le: 07 Déc 2001 02:00
Messages: 10996
Localisation: Lille et ailleurs
Je ne comprend pas que tu aies à instaler nicotine manuellement, si tu as trouvé le package 32 bits pour ta version de Fedora, utilise-le et je crois que tu n'as rien à faire d'autre.
La plupart des distribs simplifient la tâche d'installation de logiciel avec des packages. Le fichier INSTALL est à lire quand on ne dispose pas d'un tel package ;) (ex: avec certaines distributions, ou bien lorsqu'on installe une version récente style SVN d'un logiciel).
Dans /opt tu installes effectivement des logiciels tiers non prévus par ta distribution.

Sinon, peu probable, mais tu as peut être une dépendance manquante, style une librairie python. Cela dit, le fichier manquant semble être propre à Nicotine, donc ça ne serait pas une librairie. Le problème pourrait aussi venir de la configuration de python qui ne trouve pas le chemin (path) où se situe le fichier dont il a besoin.


Rapporter ce message
Haut
 Profil Site Internet 
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 12 Juil 2009 01:32 
Hors-ligne
Mangouste Du Désert

Inscrit le: 31 Jan 2009 19:04
Messages: 6
Ok, "comment installer Nicotine+ sous Fedora 11" est une question à laquelle je peux répondre. J'y suis arrivé sous F8 et ensuite F10, et facilement, car j'ai trouvé des rpm. Certes, la difficulté est de les trouver.
Donc, pour trouver des rpm de Nicotine+ pour F11, regarde peut être ici
http://www.commentcamarche.net/forum/af ... ous-fedora

bonne chance ! (quand t'auras réussi t'as qu'à venir poster l'adresse du rpm qu'on l'ai sous la main pour plus tard)

bye !


Rapporter ce message
Haut
 Profil  
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 12 Juil 2009 20:29 
111110101011 a écrit:
Je ne comprend pas que tu aies à instaler nicotine manuellement, si tu as trouvé le package 32 bits pour ta version de Fedora, utilise-le et je crois que tu n'as rien à faire d'autre.

Tu as raison et je me suis rendu compte de l'abusrdité de ce que je racontais. J'avais mal évalué la situation. Je résume ce que je comprends maintenant.

Ici se trouve une liste de paquets dont les fedoriens aimeraient disposer: https://fedoraproject.org/wiki/Packagin ... y_May_2009. A la ligne concernant nicotine+, on s'aperçoit qu'un type nommé Leigh Scott a créé un fichier "nicotine+-1.2.10-1.fc11.src.rpm". Ce fichier est une archive contenant nicotine+-1.2.10.tar.bz2 et des patchs, et un fichier nicotine+.spec dont le registre des modifications indique en dernier:
    %changelog
    * Thu May 14 2009 Leigh Scott <leigh123linux@fedoraproject.org> - 1.2.10-1
    - update to 1.2.10
    - patch and validate desktopfile

Le gestionnaire de paquet n'arrive pas à traiter ce fichier. D'après moi, il n'y a donc pas de rpm (NB: je vous rappelle que je suis novice).

Par ailleurs, j'ai pris les dernières sources sur nicotine+, décompressé et copié le répertoire nicotine+-1.2.12 dans /opt. J'ai lancé le fichier nicotine.py, et là, l'application se lance et semble fonctionner (pas encore testé).
Question: qu'apporte la contribution de Leigh Scott sur la version 1.2.10 ?

Merci encore pour votre participation.


Rapporter ce message
Haut
  
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 13 Juil 2009 11:39 
Hors-ligne
Mangouste Du Désert

Inscrit le: 31 Jan 2009 19:04
Messages: 6
Je laisse aux pros le soin de répondre à ta question de changelog, et je reviens sur les rpm : si, il en existe, j'en ai retrouvé un estampillé F8 sur mon pc ! (je crois bien l'avoir utilisé pour F10, oui presque sûr même) Et, oh ! j'ai pris des notes sur ce que je fais sur mon pc, donc j'ai retrouvé l'adresse où j'avais trouvé ce rpm :
http://download.tuxfamily.org/rpm/drpix ... ra/8/i386/
(elle vaut cher cette adresse !^^)

Je me souviens aussi que j'avais réussi à partir d'un tar.gz qu'on trouve bien plus facilement, en lisant le fichier INSTALL, j'étais très novice mais c'est allé.
j'espère que ça a marché pour toi, ciao j'y vais.

Vincezd


Rapporter ce message
Haut
 Profil  
Répondre en citant  
 Sujet du message: Re: Nicotine ne repond plus : ValueError
MessagePublié: 23 Août 2009 23:51 
Hors-ligne
Mangouste Du Désert

Inscrit le: 31 Jan 2009 19:04
Messages: 6
En fait, c'est très facile d'installer Nicotine+ même si on n'a pas d'rpm ou équivalent.
Le programme est écrit en python, donc on n'a pas besoin de faire configure;make;make install ou truc du genre : on télécharge le code, on appelle le programme et ça marche.

voir cette page officielle :
http://nicotine-plus.sourceforge.net/Ni ... Distro.htm

si seulement j'avais su cela dès le départ ...


Rapporter ce message
Haut
 Profil  
Répondre en citant  
Afficher les messages publiés depuis:  Trier par  
Publier un nouveau sujet Répondre au sujet  [ 16 messages ]  Aller à la page 1, 2  Suivant

Heures au format UTC + 1 heure [ Heure d’été ]


Qui est en ligne ?

Utilisateur(s) parcourant actuellement ce forum : Aucun utilisateur inscrit et 19 invité(s)


Vous pouvez publier de nouveaux sujets dans ce forum
Vous pouvez répondre aux sujets dans ce forum
Vous ne pouvez pas éditer vos messages dans ce forum
Vous ne pouvez pas supprimer vos messages dans ce forum
Vous ne pouvez pas insérer de pièces jointes dans ce forum

Rechercher pour:
Aller vers:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Traduction réalisée par Maël Soucaze © 2010 phpBB.fr