Bonjour,
Quelqu'un saurait-il me dire comment configurer Zone Alarm pour pouvoir me connecter ?
Le test sans firewall marche.
Merci

Testé, ça fonctionne....
Merci à moi-même et à ma pugnacité
Non non je ne plaisante pas.

ZoneAlarm v3.1.xxx
Blubster v2.0

Zonealarm Free Edition
Go to Firewall > Internet Zone Security and slide the level down to medium

Zonealarm Pro Edition

Go to Firewall> Internet Zone Security > Click Custom and then scroll down
to Allow Incoming UDP ports Select and check it and type 41170-41350 in the
field below. Then Select and check Allow Outgoing UDP ports and type
1-41350 in the field below. Hit apply and ok and you're good to go.

Zone Alarm v2.6
Blubster v1.2.3

Open Blubster > Config > Download

(under "Firewall options") type 41170 > Finish

Close Blubster and then restart it again

Make sure ZoneAlarm is on medium settings.

Submitted by Thylacine_


Blubster v2.0
Open ZoneAlarm > Program Control > Add

Choose "Blubster.exe" (You have to go to the directory were you installed
it) > Open

Now right-click "Blubster servent main exectuable" > Options...

(under Ports) check "Allow access to al Ports and Protocols"


This also works for v1.2.3 and must be done for v2.0.

Open ZoneAlarm > Firewall > Internet Zone Security > Custom

Allow incoming UDP ports: 41170
Allow outgoing UDP ports: 1-41170


Thank to Jabaman for his hard working getting this together